cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
leonzyz_bupt
Visitor
Visitor
1,925 Views
Registered: ‎12-10-2012

I've got a problem when using the LTE ul decoder IP CORE

I have generated a LTE UL decoder IP core ,and simulated it with Modelsim. But when I instantiated  the IP

core in my design ,I found it only accept 44 code word input data,and then the core blocked,no output and the input code word ready signal keep low.I used chipscope to debug it, and I have check all the input  configure data, they are all the same with the case I simulated in Modelsim. Who can tell me where may be the problems ?

 

Thank you

0 Kudos
0 Replies