cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
245 Views
Registered: ‎11-19-2010

I2S IP in slave mode

Jump to solution

 PG308 says the slave mode is unsupported.

does this it won't work at all or that anything can happen?

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
179 Views
Registered: ‎11-09-2015

HI @jcabel 

I believe that in the example design, on IP is configured as slave. So it is working at least a bit.

But it might not work in all cases, and if you face issue in this mode, you will get no support from Xilinx. So you answer would be anything can happen and if it happens, no solution will be provided.


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

1 Reply
Highlighted
Moderator
Moderator
180 Views
Registered: ‎11-09-2015

HI @jcabel 

I believe that in the example design, on IP is configured as slave. So it is working at least a bit.

But it might not work in all cases, and if you face issue in this mode, you will get no support from Xilinx. So you answer would be anything can happen and if it happens, no solution will be provided.


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post