cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
486 Views
Registered: ‎09-17-2019

I2S Transmitter FIFO size

Hello!

We would like to use the i2s IP for low latency audio processing. Is there a way to reduce the FIFO size below th 64 samples? The documentation states that transmission is only started when the FIFO is half filled.

Thanks

Tags (2)
0 Kudos
3 Replies
Highlighted
Moderator
Moderator
445 Views
Registered: ‎04-09-2019

Hello @gmueller ,

As mentioned in the PG308, The FIFO Depth allowed values are as shown in the below "FIFO Depth" Image. So, the minimum FIFO Depth is 64. So, User can't reduce the depth value below then the 64. I hope this heps to You.

Regards,

Ashok.

FIFO Depth.JPG
Highlighted
Visitor
Visitor
426 Views
Registered: ‎09-17-2019

So, is there a bug tracker or ticket system where I could request a change of the IP?

0 Kudos
Highlighted
Moderator
Moderator
379 Views
Registered: ‎11-09-2015

Hi @gmueller 

You need to contact your FAE to ask for an enhancement of the IP with the technical reason of it and the detail of your project. Then he will contact marketing with your business case and marketing will decide if the IP should be change or not.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**