cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
135 Views
Registered: ‎07-29-2019

License for the MIPI CSI-2 RX Subsystem IP v4.1 in 2019.2

Jump to solution

Hi,

Whether MIPI CSI-RX Subsystem IP v4.1 license is bundled with vivado 2019.2 or do we need to purchase the IP license?

Currently I am using evaluation license in the design

With regards,

Thejashree

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
123 Views
Registered: ‎03-30-2016

Hello @thejashree_13 

 

Please use Vivado 2020.1 which has MIPI IPs license included.

See also : https://forums.xilinx.com/t5/Video-and-Audio/MIPI-license-2020-1/m-p/1119631

 

If currently, you are using an evaluation license with Vivado 2019.2, please continue.

Right now, I believe you cannot purchase MIPI IP licenses any more since it already included in 2020.1

 

Thanks & regards
Leo

View solution in original post

0 Kudos
3 Replies
Highlighted
Xilinx Employee
Xilinx Employee
124 Views
Registered: ‎03-30-2016

Hello @thejashree_13 

 

Please use Vivado 2020.1 which has MIPI IPs license included.

See also : https://forums.xilinx.com/t5/Video-and-Audio/MIPI-license-2020-1/m-p/1119631

 

If currently, you are using an evaluation license with Vivado 2019.2, please continue.

Right now, I believe you cannot purchase MIPI IP licenses any more since it already included in 2020.1

 

Thanks & regards
Leo

View solution in original post

0 Kudos
Highlighted
Adventurer
Adventurer
115 Views
Registered: ‎07-29-2019

Hi @karnanl ,

Thank you for the response.

Currently we are using Evaluation License. What does this Evaluation License consists of? Is there any timeout for this.

Whether we will be able to use the IP in 2019.2 same as 2020.1?

With regards,

Thejashree

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
100 Views
Registered: ‎03-30-2016

Hello @thejashree_13 

Yes, time-out mechanism is enabled if you are using MIPI IP with an evaluation license. 
There is a similar discussion regarding this topic, please see also :
https://forums.xilinx.com/t5/Video-and-Audio/MIPI-licensing/td-p/941298

For MIPI CSI-2 Rx Subsystem or  MIPI CSI-2 TX Subsystem has time-out activated, all packets are reported as unsupported data types(ErrID) after time-out
     [ For MIPI CSI-2 RX : which means Interrupt Status Register ISR[8] will get set  Refer PG232]
     [ For MIPI CSI-2 TX : which means Interrupt Status Register ISR[1] will get set  Refer PG260]


Regards
Leo