cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
bingi
Newbie
Newbie
453 Views
Registered: ‎09-08-2020

MIPI CSI2

Jump to solution

I am new to MIPI CSI2. I have knowledge on VGA video which consists of parallel data, Hsync, Vsync, Active time, Front porch, Back Porch & Sync duration.

I understood that MIPI CSI2 is based MIPI DPHY which works serially in Lanes. I am not getting how to link the Timings like Front Porch, Back Porch & Sync duration in the MIPI CSI2 Protocol.

Thanks

0 Kudos
1 Solution

Accepted Solutions
karnanl
Xilinx Employee
Xilinx Employee
434 Views
Registered: ‎03-30-2016

Hello @bingi 

I believe the same topic is already discussed in this thread:
https://forums.xilinx.com/t5/Video-and-Audio/MIPI-TX-Subsystem-minimum-blanking-period/m-p/1148613#M34296

Do you need additional explanation ?


Regards
Leo


------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
Versal Example Designs : LINK
>>------------------------------------------------------------------------------------------------

View solution in original post

2 Replies
karnanl
Xilinx Employee
Xilinx Employee
435 Views
Registered: ‎03-30-2016

Hello @bingi 

I believe the same topic is already discussed in this thread:
https://forums.xilinx.com/t5/Video-and-Audio/MIPI-TX-Subsystem-minimum-blanking-period/m-p/1148613#M34296

Do you need additional explanation ?


Regards
Leo


------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
Versal Example Designs : LINK
>>------------------------------------------------------------------------------------------------

View solution in original post

bingi
Newbie
Newbie
433 Views
Registered: ‎09-08-2020

Hi @karnanl 

Thanks for the explanation. 

0 Kudos