cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
daram123
Adventurer
Adventurer
1,317 Views
Registered: ‎01-19-2018

MIPI DSI Transmitter Subsystem HW Connectivity

Jump to solution

Hi

SDI Signals convert to the MIPI DSI Outputs via DSI lanes with SLVS signalling, Also If the MIPI DSI Lanes has to have connected to MIPI CSI Lanes, how is it possible?
So what IP core we should use whether CSI/DSI to connect with CSI-2 lanes of the External Board.

How to go to 10 bit RGB101010 on DSI IP Tx Subsystem?

Thanks & Regards,
Prasanna Daram

Tags (3)
0 Kudos
Reply
1 Solution

Accepted Solutions
florentw
Moderator
Moderator
1,470 Views
Registered: ‎11-09-2015

Hi @daram123,

 

I am not sure about what you are asking.

 

However, Xilinx has MIPI CSI-2 and MIPI DSI TX solutions as well as a UHD-SDI IP.

 

You might want to start by looking at these IPs and their documentation and let me know if you have further questions.

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
Reply
1 Reply
florentw
Moderator
Moderator
1,471 Views
Registered: ‎11-09-2015

Hi @daram123,

 

I am not sure about what you are asking.

 

However, Xilinx has MIPI CSI-2 and MIPI DSI TX solutions as well as a UHD-SDI IP.

 

You might want to start by looking at these IPs and their documentation and let me know if you have further questions.

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
Reply