cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
742 Views
Registered: ‎02-15-2019

State change failed (Zynq UltraScale+ MPSoC VCU TRD 2018.3 - HDMI Video Capture)

Hi,

    When I use demo of  MPSoC VCU TRD 2018.3, some error happens. And I use computer's HDMI out to connecting the ZCU106 HDMI Rx port. Am I right?

STATE CHANGE FAILEDSTATE CHANGE FAILEDxmedia ctl logxmedia ctl log

Tags (3)
0 Kudos
4 Replies
Highlighted
Moderator
Moderator
693 Views
Registered: ‎11-09-2015

Hi @liufengwuhen ,

Make sure you are using the patch from AR#71798 as they might solve the issue you have.


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Explorer
Explorer
677 Views
Registered: ‎02-15-2019

The image.ub is download in rdf0428-zcu106-vcu-trd-2018-3\images\vcu_trd directory. Am I need to compile the petalinux again?

 

0 Kudos
Moderator
Moderator
675 Views
Registered: ‎11-09-2015

HI @liufengwuhen ,

Yes to apply the patch you will need to recompile the image.


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Moderator
Moderator
624 Views
Registered: ‎11-09-2015

HI @liufengwuhen ,

Do you have any updates on this? Were you able to test with the patch?

If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" button below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos