cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
1,746 Views
Registered: ‎02-06-2018

Suggestion for Full HD video streaming using FPGA board?

Hi,

 

I am trying to process 1080p video from an HD camera at 30fps on LVDS. Data rate per second would be around 1.8Gbps and I would like to split the data into 5 channels which would be sent to a DAC(Digital to analog converter). Please suggest me the desired clock required and an appropriate FPGA board which supports this.

 

Appreciate your time and concern. 

 

Best,

Shashi

Tags (1)
0 Kudos
5 Replies
Scholar
Scholar
1,703 Views
Registered: ‎02-27-2008

Look at:

 

reVision and the xcu102

 

https://www.xilinx.com/products/design-tools/embedded-vision-zone.html

 

https://www.xilinx.com/products/boards-and-kits/ek-u1-zcu102-g.html

 

It supports HDMI in & out, MIPI in, USB in.  Non-standard video is up to you to interface, but with the board's capabilities, it should be no issue to develop.

Austin Lesea
Principal Engineer
Xilinx San Jose
0 Kudos
Highlighted
1,693 Views
Registered: ‎02-06-2018

Thank you for your valuable suggestion Austin. 

 

I have a Zynq 7000 handy. would it be possible to do such operation using it instead of a Zynq Ultrascale. 

 

I assume Ultrascale means a much lower nm technology or is there any significant difference between Zynq 7000 and Zynq Ultrascale?

 

Looking forward for your valuable inputs.

 

Thank you.

0 Kudos
Highlighted
Scholar
Scholar
1,690 Views
Registered: ‎02-27-2008

Look at the supported boards for reVision,

 

 

 

 

Austin Lesea
Principal Engineer
Xilinx San Jose
0 Kudos
Highlighted
Moderator
Moderator
1,674 Views
Registered: ‎11-09-2015

Hi shashisvarna@gmail.com,

 

I don't think you need to use revision for this if you know a bit of RTL.

 

Zynq should be fine for the application if you want to do 1.8Gbps/5. The selectIO should support it.

 

You could even consider a spartan-7 for this type of application.

 

For the correct board, you might want to talk with an authorized distributor. They will point you

 

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Moderator
Moderator
1,586 Views
Registered: ‎11-09-2015

Hi shashisvarna@gmail.com,

 

If everything is clear for you on this subject, please kindly mark a reply as solution to close the topic.

 

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos