cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
903 Views
Registered: ‎07-05-2018

Using MIPI CSI-2 and LI-IMX274MIPI-FMC in my own design

Jump to solution

Hi~

Recently, our design need a digital camera,  so I'm thinking is there any tutorial that can help me integrate an LI-IMX274MIPI-FMC in our system

Thanks~

Tags (2)
1 Solution

Accepted Solutions
florentw
Moderator
Moderator
849 Views
Registered: ‎11-09-2015

HI eleicoto@outlook.com 

No there is not specific tutorail but you can generate the MIPI CSI-2 example on ZCU102 this would give you a good reference to start with. Refer to PG232 Chapter 5.

The you just have to port this design to your board.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

4 Replies
florentw
Moderator
Moderator
850 Views
Registered: ‎11-09-2015

HI eleicoto@outlook.com 

No there is not specific tutorail but you can generate the MIPI CSI-2 example on ZCU102 this would give you a good reference to start with. Refer to PG232 Chapter 5.

The you just have to port this design to your board.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

809 Views
Registered: ‎07-05-2018

Thanks for your reply, I have been following this guide to design my system, but there is a problem, it seems like the license I used is not allowed to access MIPI or HDMI IP, so how can I get these license?

01.png

florentw
Moderator
Moderator
795 Views
Registered: ‎11-09-2015

HI eleicoto@outlook.com 

Go to your licensing account and find the cores in the "evaluation and no charges cores". Then you will be able to generate the evaluation license for the cores.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
764 Views
Registered: ‎07-05-2018

Thanks for your help, I guess I will use evaluation license first.

0 Kudos