cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
1,004 Views
Registered: ‎02-19-2018

Video Processing Subsystem v1.0 licence

Jump to solution

Hello!

 

I wanted to compile "xapp1285" in Vivado 2017.4 but then received this message:

 

ERROR: This script was generated using Vivado <2015.4> and is being run in <2017.4> of Vivado.
Please run the script in Vivado <2015.4> then open the design in Vivado <2017.4>. Upgrade the
design by running "Tools => Report => Report IP Status...", then run write_bd_tcl to create an updated script.

 

Then I installed Vivado 2015.4 and started "all.tcl" script again. In Vivado 2015.4 I received this error message: 

Video Processing Subsystem (v1.0 (Rev. 1)) - IP License not found.

 

I have evaluation licence for Video Processing Subsystem (v2.0). 

 

What should I do next to succesfully compile "xapp1285"? Thx!

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,182 Views
Registered: ‎11-09-2015

Hi @n.horvat,

 

1. Use 2015.4 (this is done)

 

2. Make sure you are correctly using the license. Could you share the output file from report_environment -file file.txt?

 

Thx,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
1 Reply
Highlighted
Moderator
Moderator
1,183 Views
Registered: ‎11-09-2015

Hi @n.horvat,

 

1. Use 2015.4 (this is done)

 

2. Make sure you are correctly using the license. Could you share the output file from report_environment -file file.txt?

 

Thx,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos