cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
678 Views
Registered: ‎09-25-2017

Video Processing Subsystem v2.0 single pixel input mapping

Jump to solution

Hi,

  I would like to use Video Processing Subsystem v2.0 for Chroma resampling from 4:2:2 to 4:4:4.

  Input is single pixel per clk, 10bit per component.

  On page 11 of PG231, there are info on how to map color components to TDATA vector for 2 pixel per clock.  However, there is no info on how to map 1 pixel per clk color components to TDATA. 

  Pls provide info.

 

Neo

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
651 Views
Registered: ‎10-04-2017

Hi wtneo@leica,

 

Please see UG934.

 

Table 1-4 includes the single pixel mapping that you are looking for.

2018-12-10 07_40_15-Xilinx Documentation Navigator 2017.2 -  http___www.xilinx.com_support_documenta.png

-Sam

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub

View solution in original post

0 Kudos
1 Reply
Moderator
Moderator
652 Views
Registered: ‎10-04-2017

Hi wtneo@leica,

 

Please see UG934.

 

Table 1-4 includes the single pixel mapping that you are looking for.

2018-12-10 07_40_15-Xilinx Documentation Navigator 2017.2 -  http___www.xilinx.com_support_documenta.png

-Sam

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub

View solution in original post

0 Kudos