cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
c.gannamani@gmail.com
Contributor
Contributor
643 Views
Registered: ‎01-17-2018

Video phy controller example design

Jump to solution

Hi Team,

I generated video phy controller IP core for HDMI TX configuration. The IP core got synthesized but I am unable to open IP example design (attached the image in which it is disabled). 

Please provide the solution.

Thank you

Krishnachaitanya

Tags (2)
vid_phy_cntrl_ex_ip_error1.PNG
vid_phy_cntrl_ex_ip_error2.PNG
0 Kudos
1 Solution

Accepted Solutions
florentw
Moderator
Moderator
509 Views
Registered: ‎11-09-2015

HI c.gannamani@gmail.com 

For all versions before 2018.3, the Test Pattern Generator requires a license that you can generate for free from your licensing account.

Just search for the test pattern generator in the Evaluation and No Charge Cores and generate the license.

Or use a more recent vivado version

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
5 Replies
c.gannamani@gmail.com
Contributor
Contributor
589 Views
Registered: ‎01-17-2018

Hi, Waiting for your reply

0 Kudos
florentw
Moderator
Moderator
560 Views
Registered: ‎11-09-2015

HI c.gannamani@gmail.com 

It is not that you cannot open the example design for the Video phy, it is just that there is no example design for the Video Phy because the video phy cannot be used a standalone IP. It can only be used with the HDMI Subsystem IP or Displayport Subsystem IP.

If you want an example design you need to open from the HDMI Subsystem IP.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
c.gannamani@gmail.com
Contributor
Contributor
542 Views
Registered: ‎01-17-2018

Hi,

I want to use it with the HDMI TX Subsystem IP only.

I generated HDMI TX SUBSYSTEM then opened the example  design, it throws Video TPG Subsystem licence error.

Is there a way to open an example design and without Video TPG Subsystem module?

hdmi_tx_ss_error.JPG

 

0 Kudos
watari
Professor
Professor
538 Views
Registered: ‎06-16-2013

Hi c.gannamani@gmail.com 

 

Refer the following URL, even if it is described DP.

 

https://www.xilinx.com/support/answers/71085.html

 

Best regards,

0 Kudos
florentw
Moderator
Moderator
510 Views
Registered: ‎11-09-2015

HI c.gannamani@gmail.com 

For all versions before 2018.3, the Test Pattern Generator requires a license that you can generate for free from your licensing account.

Just search for the test pattern generator in the Evaluation and No Charge Cores and generate the license.

Or use a more recent vivado version

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos