cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
402 Views
Registered: ‎12-26-2019

ZCU104: display to monitor

Hi,

 

I am a beginner of FPGA and trying to set up the board, ZCU104, now.

The main purpose is to display the output of camera(See3CAM) and process the video(which is a series of images) with CNN or something.

After all setup for board, I checked the operation of the camera capturing well and the board saved the image files successfully.

Now, I want to display the camera on monitor in real-time and access the output files.

I simply connected the board to my DELL monitor, dp to  dp, but it didn't work.

So, the questions are

 

1. How can the board display the output of the camera on the monitor?

2. Plus, do ZCU104 support the Linux GUI or some OS for easy access to the board?

 

Thank you for reading this, and I'll wait for your reply !!!

0 Kudos
2 Replies
Highlighted
Teacher
Teacher
386 Views
Registered: ‎07-09-2009

this is your place to go for information

https://www.xilinx.com/products/boards-and-kits/zcu104.html#documentation

 

Id strongly suggest as a newbie you read up on at least the users guide, 

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
Highlighted
Teacher
Teacher
327 Views
Registered: ‎06-16-2013

Hi @eejay 

 

Refer the following TRDs.

They are for different boards (ZCU102 and ZCU 106).

But you can understand how to use what you want to do.

 

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/180977780/Zynq+UltraScale+MPSoC+Base+TRD+2019.2

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/176783395/Zynq%2BUltraScale%2BMPSoC%2BVCU%2BTRD%2B2019.2

 

Best regards,