cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
1,498 Views
Registered: ‎11-21-2018

ZYNQ + Parallel interface cmos camera OV5640 Linux driver

Jump to solution

Hello everyone,

 

I want to use parallel interface of the ov5640 camera in linux, but i can not find any device driver in the xlnx-linux(kernel version 4.14.0),someone can help me?

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Visitor
Visitor
1,392 Views
Registered: ‎11-21-2018

Hi,watari

Thanks for your reply,I have been solved this problem successfully.By the way ,"Parallel Interface" is the "DVP Interface".

View solution in original post

0 Kudos
5 Replies
Highlighted
Moderator
Moderator
1,450 Views
Registered: ‎11-09-2015

Hi @lh123lh,

I am not sure how much work is involved to have the camera working. Are you using any IPs to connect to your camera. This is the drivers for this IP that you should be looking.

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Teacher
Teacher
1,431 Views
Registered: ‎06-16-2013

Hi @lh123lh

 

I'm not familiar with OV5640 Linux driver.

However I mention to you.

 

What do you mean "Parallel Interface" ?

Is the interface "Parallel" between OV5640 to FPGA for video signal ?

(It seems that the interface is MIPI CSI from linux-xlnx/drivers/media/i2c/ov5640.c)

Is the interface "Parallel" between OV5640 to FPGA for host interface ?

(It seems that the interface is I2C from linux-xlnx/drivers/media/i2c/ov5640.c)

 

If you only used OV5740 in linux and didn't find any source codes in linux-xlnx/drivers/media/i2c/ov5640.c, I guess you can do back port OV5640 driver's from latest to your version.

 

Would you share mode details ?

 

Best regards,

 

 

 

0 Kudos
Highlighted
Visitor
Visitor
1,393 Views
Registered: ‎11-21-2018

Hi,watari

Thanks for your reply,I have been solved this problem successfully.By the way ,"Parallel Interface" is the "DVP Interface".

View solution in original post

0 Kudos
Highlighted
Visitor
Visitor
1,391 Views
Registered: ‎11-21-2018

Hi,florentw

Thanks for your reply.

0 Kudos
Highlighted
Moderator
Moderator
1,300 Views
Registered: ‎11-09-2015

Hi @lh123lh,

Thank you for sharing.

As this is now solved for you, could you kindly mark the topic as closed by marking your previous reply as accepted solution?

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos