Zynq7000 HDMI OUT video design

[jan_ch]

Hello, I will be preparing the project for a custom board with Zynq-7000 with ADV7513. The design must be able to handle Linux OS GUI interface. I am looking for advice and maybe some tutorials because I would like to choose the best way to achieve that. I saw three main ways:

- using VDMA and Analog Devices IPcores

- using VDMA and Xilinx IP cores such as AXI stream to video out, timing controller, etc

- I read about using Xilinx Frame buffers and IP cores for it.

Which way would you recommend and is there a complex tutorial with hardware and Linux information for HDMI out?

Best regards,

JAN

[tedbooth]

I don't know of a tutorial that covers all of what you are looking for but the ZC702 TRD design might be a good place to start:

https://www.xilinx.com/support/documentation/boards_and_kits/zc702_zvik/2015_4/ug925-zynq-zc702-base-trd.pdf

If you are just getting started doing video on Xilinx parts, I recommend looking at the following Video Series:

https://forums.xilinx.com/t5/Video/Xilinx-Video-Series/td-p/849583

[watari · Accepted solution]

Hi @jan_ch 

I suggest you to refer the followings.

# Xilinx Video Design Hub

https://www.xilinx.com/support/documentation-navigation/design-hubs/dh0083-video-hub.html

# AR61625

https://www.xilinx.com/support/answers/61625.html

# AXI4Stream to Video Output

https://www.xilinx.com/support/documentation/ip_documentation/v_axi4s_vid_out/v4_0/pg044_v_axis_vid_out.pdf

Best regards,

[florentw]

Hi @jan_ch 

Do you have any updates on this topic? Were @tedbooth and @watari 's replies enough for you?

If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" button below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Thanks and Regards,