cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
wbyjerry
Adventurer
Adventurer
659 Views
Registered: ‎07-29-2013

where to find the map value with data type in the MIPI CSI-2 Transmitter Subsystem

Jump to solution

Hi

I want to use the MIPI CSI-2 Transmitter Subsystem in my design. 

I could not find any table to say data type map with Tuser[6:1] in PG260.

Like RGB888, the Tuser[6:1] value need be set to 0x24.

 

Thanks you for the help.

 

Regards.

 

Wbyjerry.

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
karnanl
Xilinx Employee
Xilinx Employee
632 Views
Registered: ‎03-30-2016

Hello @wbyjerry 

The MIPI CSI-2 spesification mention all of these information.
Please go to https://mipi.org/specifications/csi-2  to download the spesification.

MIPI CSI-2 spec defines a few class of Data Types, if you are intrested in image data types , perhaps these table will help.

MIPI_CSI2_DATA_TYPES.png



Kind regards
Leo


------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
Versal Example Designs : LINK
>>------------------------------------------------------------------------------------------------

View solution in original post

1 Reply
karnanl
Xilinx Employee
Xilinx Employee
633 Views
Registered: ‎03-30-2016

Hello @wbyjerry 

The MIPI CSI-2 spesification mention all of these information.
Please go to https://mipi.org/specifications/csi-2  to download the spesification.

MIPI CSI-2 spec defines a few class of Data Types, if you are intrested in image data types , perhaps these table will help.

MIPI_CSI2_DATA_TYPES.png



Kind regards
Leo


------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
Versal Example Designs : LINK
>>------------------------------------------------------------------------------------------------

View solution in original post