cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
602 Views
Registered: ‎08-06-2019

xdpdma example ZCU102 black screen

I am attempting to run the xdpdma example standalone application on the ZCU102 board using the 2018.3 SDK. When the program runs, it only outputs a black screen (though at the correct resolution according to my monitor) and not the red/green example screen. I'm using a Viewsonic VG2439m-LED monitor. Additionally, I've been able to change the resolution of the display in the code and the correct resolution in my code gets output to the display. Would there any reasons why the displayport would seemingly output nothing as opposed to the example framebuffer in the provided code?

0 Kudos
5 Replies
Highlighted
Moderator
Moderator
565 Views
Registered: ‎11-09-2015

HI @draab 

Is the board connected using the Displayport Connector? Note that the video frame buffer example is using HDMI. So this is a different connector?

Is your monitor a Displayport monitor or are you using an adapter? If you are using an DP to HDMI adapter please use a DP monitor. We do not characterize adapters and many are not working (for example if they are not active adapters).

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
Highlighted
Moderator
Moderator
500 Views
Registered: ‎11-09-2015

Hi @draab 

Were you able to make the example design working?


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Teacher
Teacher
482 Views
Registered: ‎06-16-2013

Hi @draab 

 

Do you or your source code concern supported resolution on LCD monitor ?

Would you share what you set resolution, if possible ?

 

Best regards,

Highlighted
Moderator
Moderator
440 Views
Registered: ‎11-21-2018

Hi @draab

Can you share your current status for this issue? 

Thanks and Regards,

 

 

Aoife
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Observer
Observer
428 Views
Registered: ‎08-06-2019

My apologies for dropping this thread but I've shelved using Displayport and am using HDMI instead for my project.