UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor videophile
Visitor
162 Views
Registered: ‎03-18-2019

Cannot build video sample code for TB-FMCH-HDMI4K with QUATTRO?

Jump to solution

There is no information available to help us to build the sample code to check the video path in the QUATTRO board using TB-FMCH-HDMI4K card.

According to the tx manual (attached) page 61, the TB-FMCH-HDMI4K board and the HDMI subsystem are supported in some boards: KC705/KCU105/ZC706/VCU118 but not the QUATTRO. Therefore we cannot do the build using the sample code from the Vivado design tool/subsystem. It does not list the QUATTRO as one of the target FPGA to do the build. Anyone out there has a solution for this!

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
112 Views
Registered: ‎03-07-2018

Re: Cannot build video sample code for TB-FMCH-HDMI4K with QUATTRO?

Jump to solution

Hello @videophile 

I believe you are using ACDC Quattro Kintex UltraScale Development Platform. IP example design for HDMI RX/TX is provided for Xilinx specific platform. If you are using other platform then you need customize this example design according to your custom board.

You should go through IP example design targeted for KCU105 and modify this design according to your board.

Regards,
Bhushan

-------------------------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------------------------
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
113 Views
Registered: ‎03-07-2018

Re: Cannot build video sample code for TB-FMCH-HDMI4K with QUATTRO?

Jump to solution

Hello @videophile 

I believe you are using ACDC Quattro Kintex UltraScale Development Platform. IP example design for HDMI RX/TX is provided for Xilinx specific platform. If you are using other platform then you need customize this example design according to your custom board.

You should go through IP example design targeted for KCU105 and modify this design according to your board.

Regards,
Bhushan

-------------------------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------------------------
0 Kudos