UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
396 Views
Registered: ‎05-03-2018

Does the Display Port RX subsystem 2.1 IP is supported for Kintex-7 -1 speed grade when HDCP is disabled?

Jump to solution

Hello,

 

In table LogiCORE IP Facts Table ( DisplayPort RX Subsystem v2.1 Product Guide, p.4) there is the note 2  regarding the Kintex-7 speed grade needs. Can you confirm that the -2 speed grade for kintex-7 is needed only in case HDCP feature is requested, and since we do not need HDCP we could use the -1 speed grade?

 

DP.PNG

Thanks in advance,

Andrea

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
399 Views
Registered: ‎11-09-2015

Re: Does the Display Port RX subsystem 2.1 IP is supported for Kintex-7 -1 speed grade when HDCP is disabled?

Jump to solution

Hello @andreac_avnet,

 

As mentioned in the user guide, the best way to know if a device is supported or not is to look in the IP catalog:

Notes:
1. For a complete list of supported devices, see the Vivado IP catalog.

But yes, the limitation on -1 devices mentioned in PG233 only applies when HDCP is enabled.

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
2 Replies
Moderator
Moderator
400 Views
Registered: ‎11-09-2015

Re: Does the Display Port RX subsystem 2.1 IP is supported for Kintex-7 -1 speed grade when HDCP is disabled?

Jump to solution

Hello @andreac_avnet,

 

As mentioned in the user guide, the best way to know if a device is supported or not is to look in the IP catalog:

Notes:
1. For a complete list of supported devices, see the Vivado IP catalog.

But yes, the limitation on -1 devices mentioned in PG233 only applies when HDCP is enabled.

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
Adventurer
Adventurer
361 Views
Registered: ‎05-03-2018

Re: Does the Display Port RX subsystem 2.1 IP is supported for Kintex-7 -1 speed grade when HDCP is disabled?

Jump to solution
Thank you for the help.

Regards.
0 Kudos