UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
684 Views
Registered: ‎05-11-2018

HDMI 2.0 on Artix-7 series for 4K60Hz video input.

Jump to solution

We are wanting to try and migrate our design to an Artix-7 part for a lower cost implementation.  According to the PG236 (for 3.1) pg 54 Artix will only support HDMI 1.4 using the Xilinx HDMI RX Subsystem IP.  We need to support 4K 60Hz input.  I assume the GTPs are not fast enough to support the HDMI 2.0 resolutions like the GTXs can. Is there any way to use an Artix-7 device and support 4K 60Hz?  Are there VbyOne IPs that will support 4K60Hz in an Artix-7 device? 

Kerry

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
676 Views
Registered: ‎10-04-2017

Re: HDMI 2.0 on Artix-7 series for 4K60Hz video input.

Jump to solution

Hi Kerry, 

take a look at this blog post.

It looks like the solution for TED is still listed as coming soon for Artix-7. Please inquire with TED for more information on this solution.

Also, here is a link to our IP search page which will list IP from our partners. A quick search shows that Omnitek has a V-by-One IP as well but only a TX for a Zynq platform.

 

Regards,

Sam

 

 

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub
0 Kudos
2 Replies
Moderator
Moderator
677 Views
Registered: ‎10-04-2017

Re: HDMI 2.0 on Artix-7 series for 4K60Hz video input.

Jump to solution

Hi Kerry, 

take a look at this blog post.

It looks like the solution for TED is still listed as coming soon for Artix-7. Please inquire with TED for more information on this solution.

Also, here is a link to our IP search page which will list IP from our partners. A quick search shows that Omnitek has a V-by-One IP as well but only a TX for a Zynq platform.

 

Regards,

Sam

 

 

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub
0 Kudos
Moderator
Moderator
607 Views
Registered: ‎11-09-2015

Re: HDMI 2.0 on Artix-7 series for 4K60Hz video input.

Jump to solution

HI @kmwilliams,

Do you have any update on this? Was the reply from @samk enough for you?

If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" button below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos