UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor m.stappers
Visitor
5,223 Views
Registered: ‎09-25-2007

Hi Everybody,   I've got a Little problem. I want to simu...

Hi Everybody,
 
I've got a Little problem. I want to simulate a 200kHz trigger, so that every 200KHz a new cycle can be begin and in that cycle I want that every 20us a new instruction is allowed. When I want to simulate this I can only get a integer value and the sample time is 1 sec. Can I reduce this time? Or can I simulate this function.
 
Best Regards,
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
5,206 Views
Registered: ‎08-07-2007

Re: Hi Everybody, I've got a Little problem. I want to simu...

By default the Simulink system period and the Gateway sample periods are both set to 1.  The important thing is their ratio to each other.  If you wish to simulate your model in Simulink with values representative of your actual hardware then change both of these values accordingly.
0 Kudos