UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor sghaiera
Visitor
6,137 Views
Registered: ‎01-16-2008

HwCosim Error AccelDSP10.1

When I run the HwCosim Generation it gives me this error, any advise on how to solve the problem
 
 
ERROR:TclTasksC - ERROR:TclTasksC:project_028 - project set : Unknown property
   value "xc2v2000"
 
   Type [project properties] for more information.
ERROR: An error occurred when creating the ISE project.
 
Failed to execute command "project set device xc2v2000".
ERROR:TclTasksC:project_030 - project set: Cannot set "Device=xc2v2000"
0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
6,126 Views
Registered: ‎08-07-2007

Re: HwCosim Error AccelDSP10.1

Please make sure you can target this device in ISE standalone.  If this device is not available in ISE it will not be available from AccelDSP.

If you've confirmed that you can target a Virtex-II 2000 in ISE and you still get this error you can try running xlupdatepartinfo at the MATLAB promt and try again.  If it fails again with this message please create a WebCase with Xilinx support for further assistance:
http://www.xilinx.com/support/clearexpress/websupport.htm

0 Kudos
Visitor sghaiera
Visitor
6,117 Views
Registered: ‎01-16-2008

Re: HwCosim Error AccelDSP10.1

What I get after executing the command is this warning "The following devices are not installed but ar ein the allowed list"

Any suggestion.
0 Kudos