UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor ramanar
Visitor
502 Views
Registered: ‎12-11-2018

LogiCORE IP Video PHY Controller v2.2 question

Jump to solution

PG230 (December 5, 2018) indicates on page 5 that 

<quote>

The Video PHY Controller does not support standalone usage.

</quote>

Is there any possible way to use this with a non-Xilinx DisplayPort Link Layer controller? What feature support is missing in the IP, that is preventing its use along with an external (non-Xilinx) Link Layer controller?

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
431 Views
Registered: ‎10-04-2017

Re: LogiCORE IP Video PHY Controller v2.2 question

Jump to solution

Hi @ramanar,

 

The Video PHY Controller was developed specifically to work with either the Xilinx DisplayPort IP or the HDMI IP.

This means that interface and control are specific to these IPs and because this is not supported in a standalone usage, we do not document the PHY controller to the level needed to interface to another IP. 

-Sam

 

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub
0 Kudos
4 Replies
Moderator
Moderator
432 Views
Registered: ‎10-04-2017

Re: LogiCORE IP Video PHY Controller v2.2 question

Jump to solution

Hi @ramanar,

 

The Video PHY Controller was developed specifically to work with either the Xilinx DisplayPort IP or the HDMI IP.

This means that interface and control are specific to these IPs and because this is not supported in a standalone usage, we do not document the PHY controller to the level needed to interface to another IP. 

-Sam

 

Don't forget to reply, kudo, and accept as solution.

Xilinx Video Design Hub
0 Kudos
Moderator
Moderator
375 Views
Registered: ‎11-09-2015

Re: LogiCORE IP Video PHY Controller v2.2 question

Jump to solution

HI @ramanar,

Was @samk's reply enough for you?

If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" button below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Visitor ramanar
Visitor
236 Views
Registered: ‎12-11-2018

Re: LogiCORE IP Video PHY Controller v2.2 question

Jump to solution

I don't see a button labeled "Accept as solution"

0 Kudos
Moderator
Moderator
219 Views
Registered: ‎11-09-2015

Re: LogiCORE IP Video PHY Controller v2.2 question

Jump to solution

Hi @ramanar,

As we had no reply from you and we believed we provided the correct answer, the reply was accepted as solution for you.

Note that even if we have the ability to mark as accepted solution, we prefer the user to mark as solution to make sure everything is clear

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos