UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
238 Views
Registered: ‎11-09-2016

VDMA delay between frames

Hi,

I configured VDMA as Fsycn=None and Lockgen=Master. Also video parameters:

HSIZE=200byte

STRIDE=200byte

VSIZE=4line

FrameCount=3

How can i control delay between frames? Or should i change Fsync to tuser similar options for control it.  

vdma2.png

Second question: When 8bit AXIS is used, there is no delay between lines. You can see low level tvalid signal in the figure. But with 16bit AXIS, there is a 2-3 clocks delay. Why? How can i remove this delay? 

Thanks

 

 

 

 

Tags (2)
0 Kudos
2 Replies
Moderator
Moderator
164 Views
Registered: ‎11-09-2015

Re: VDMA delay between frames

HI @berker_atel 

I am not sure if you can improve this. If you check the figure 2-1 in pg020 you will see that there is a delay between 2 frames.

Is there a reason why you need to change this? In nost video system you have the blanking period on the native interface so this delay is not much and won't be seen at the output

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Moderator
Moderator
128 Views
Registered: ‎11-21-2018

Re: VDMA delay between frames

Ho @berker_atel 

Do you have any update on this?

Regards,

Aoife
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos