UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
407 Views
Registered: ‎09-05-2019

Video Mixer to DP

Jump to solution

I have a video mixer connected to zynqmp-display via a framewriter.  If I try to use the mixer via kmssink bus-id=<mixer address>, it fails because there is no crtc/connector.  In the TRD, the mixer is connected to HDMI and the mixer output port connected to the HDMI encoder.   How do I do the equivilent with DP?

 

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
162 Views
Registered: ‎11-21-2018

Re: Video Mixer to DP

Jump to solution

Hi matthew.singer@elbitsystems-us.com 

If your question is answered or your issue is solved, please kindly mark the response which helped as a solution (click on "Accept as solution" button below the reply).

 

If this is not solved/answered, please reply in the topic giving more information on your current status.

 

Thanks and Regards,

Aoife
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
5 Replies
Scholar watari
Scholar
326 Views
Registered: ‎06-16-2013

Re: Video Mixer to DP

Jump to solution
Moderator
Moderator
280 Views
Registered: ‎11-09-2015

Re: Video Mixer to DP

Jump to solution

HI matthew.singer@elbitsystems-us.com 

If I try to use the mixer via kmssink bus-id=<mixer address>, it fails because there is no crtc/connector

[Florent] - Are you able to display anything on the DP link? For me it seems that the issue is that the monitor is not detected. Make sure you are using a DP monitor (and not an HDMI monitor using an adapter).

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
Highlighted
268 Views
Registered: ‎09-05-2019

Re: Video Mixer to DP

Jump to solution

We use DP thru a framewriter. That works fine.  The issue is DRM.  The mixer driver expects the mixer output to be connected to an encoder (like the HDMI in the TRD).  There is no eqivilent input on the DP driver.

What I have done is make a dummy encoder driver (basically take the HDMI driver and just make a skeleton out of it.).  Only problem I'm having is that drm_atomic_helper_wait_for_dependencies() times out waiting for a page flip and I can't seen to figure out what drm_crtc_commit it is trying to access.

 

Moderator
Moderator
207 Views
Registered: ‎11-09-2015

Re: Video Mixer to DP

Jump to solution

HI matthew.singer@elbitsystems-us.com 

There sould be an encoder/connector present for the DP controller if a monitor is connected.

You might want to use the released image for ZCU102/ZCU104 or ZCU106 and run a modetest command with the DP port connected to a DP monitor and you should see the info.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Moderator
Moderator
163 Views
Registered: ‎11-21-2018

Re: Video Mixer to DP

Jump to solution

Hi matthew.singer@elbitsystems-us.com 

If your question is answered or your issue is solved, please kindly mark the response which helped as a solution (click on "Accept as solution" button below the reply).

 

If this is not solved/answered, please reply in the topic giving more information on your current status.

 

Thanks and Regards,

Aoife
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos