05-10-2018 02:46 AM
05-10-2018 03:04 AM
The xapp1092 is obsolete, this is why you cannot find it. Xilinx won't provide it anymore.
The recommendation is to use the xapp1249. The xapp applies for Zynq-7000. The reference design is for KC705 but can be moved to zc706.
05-10-2018 08:16 AM
Thanks for replying.
I know that XAPP1092 has been superseded as it used the old SDI IP and ISE. But i currently have a zc706 and Inrevium TB-FMCH-3GSDI2A FMC card that was supported by XAPP1092. The later XAPP1249 uses a newer Inrevium FMC board that i don't have. The need is for internal experimentation, not inclusion in our new bespoke design which will use the new UHD SDI IP.
05-10-2018 08:27 AM
You can try to ask your FAE if he can provide this xapp1092 then.
05-18-2018 11:14 AM
If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" buton below the reply)
If this is not solved/answered, please reply in the topic giving more information on your current status.
Thanks and Regards,