UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer mengmcxl
Observer
294 Views
Registered: ‎07-16-2019

ZCU102 MIPI Reference project generation

Jump to solution

Hi,

I have a ZCU102 board, downloaded rdf0421-zcu102-base-trd-2019-1.zip for MIPI camera demo.

I use the pre-built "SD card", the demo works.

Then I follow the pg232 to generate the project, Vivado can make hdf and bit files, but Petalinux show errors when make a SD image.

Thanks,

 

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
188 Views
Registered: ‎11-09-2015

Re: ZCU102 MIPI Reference project generation

Jump to solution

HI @mengmcxl 

In the TRD files, under zcu102_base_trd\hw you will find a DSA file which contains the vivado design. Open vivado and read the dsa file using the foloowing command:

open_dsa <path_to_dsa>/zcu102.dsa

More details are exaplained in the following page:

https://www.xilinx.com/html_docs/xilinx2019_1/sdsoc_doc/sdsoc-platform-migration-ayj1504034371644-1.html

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
3 Replies
Xilinx Employee
Xilinx Employee
269 Views
Registered: ‎03-30-2016

Re: ZCU102 MIPI Reference project generation

Jump to solution

Hello @mengmcxl 

1. PG232 Chapter 5 described Application Example Design, It's a different design compared to Zynq UltraScale+ MPSoC Base TRD.
    ( PG232 Example design does not have Linux )
2. If you want to build ZCU102 TRD design , please follow the instruction in the Wiki.
    https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/126320678/Zynq+UltraScale+MPSoC+Base+TRD+2019.1#ZynqUltraScale+MPSoCBaseTRD2019.1-BuildandRunFlow
3. For Petalinux/Linux driver related question please post question on
    https://forums.xilinx.com/t5/Embedded-Systems/ct-p/EMBED

Thanks & regards
Leo

 

Observer mengmcxl
Observer
231 Views
Registered: ‎07-16-2019

Re: ZCU102 MIPI Reference project generation

Jump to solution

Hi

In the links, I did not find the way to recover the Vivado project that can make a hdf and bit files to further make SD image same as the working pre-build TRD SD image. 

0 Kudos
Moderator
Moderator
189 Views
Registered: ‎11-09-2015

Re: ZCU102 MIPI Reference project generation

Jump to solution

HI @mengmcxl 

In the TRD files, under zcu102_base_trd\hw you will find a DSA file which contains the vivado design. Open vivado and read the dsa file using the foloowing command:

open_dsa <path_to_dsa>/zcu102.dsa

More details are exaplained in the following page:

https://www.xilinx.com/html_docs/xilinx2019_1/sdsoc_doc/sdsoc-platform-migration-ayj1504034371644-1.html

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**