UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
707 Views
Registered: ‎10-31-2016

ZCU106: TRD for VCU

Hello, 

 

I took the example project from 

http://www.wiki.xilinx.com/Zynq%20UltraScale%20MPSoC%20VCU%20TRD%202018.1%20-%20Design%20Module%204?responseToken=0d2781738bdcd858a1b3ed4416948c3c4

 

this project runs well but when I check the CPU load (using TOP), I found that in 4K, 60Hz the load is around 88% (TOP tool only shows CPU usage for one core) for HEVC_HIGH. 

 

I would like to know why the CPU usage is high?

 

Thanking you 

Best regards 

0 Kudos
4 Replies
Moderator
Moderator
676 Views
Registered: ‎11-09-2015

Re: ZCU106: TRD for VCU

Hi @msh,

 

You should be able to do some profiling on the CPU to check why the CPU usage is so high. It might depends on your source/sink if writing from a file or to network


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Explorer
Explorer
674 Views
Registered: ‎10-31-2016

Re: ZCU106: TRD for VCU

I just use the MIPI camera just like in the project. 

Then use the encoder and decoder for the stream to display in HDMI without saving the stream as it explained in the example with the .cfg file. Not sure what software is doing though I just took the image file.

 

% vcu_gst_app /media/card/config/1-4kp60/Display/Single_4kp60_HEVC_HIGH.cfg

 

How can I do profiling?

 

Best regards 

0 Kudos
Moderator
Moderator
628 Views
Registered: ‎11-09-2015

Re: ZCU106: TRD for VCU

Hi @msh

 

I think you can use this:

http://www.wiki.xilinx.com/Zynq+UltraScale%EF%BC%8BMPSoC+Graphics-+GPU+Profiling+using+ARM+Streamline+performance+analyzer

 

And adapt it from your project


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Moderator
Moderator
572 Views
Registered: ‎11-09-2015

Re: ZCU106: TRD for VCU

Hi @msh,

 

Do you have any updates on this?

 

If your question is answered or your issue is solved, please kindly mark the response which helped as solution (click on "Accept as solution" buton below the reply)

If this is not solved/answered, please reply in the topic giving more information on your current status.

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos