UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
9,456 Views
Registered: ‎11-28-2011

IDELAYCTRL ref clock

The V5 datasheet specifies the reference clock for IDELAYCTRL as 200MHz.  Is this the minimum frequency? 

I only have a 120MHz oscillator, so would I need to create a 200MHz from a PLL or DCM?

 

 

Tags (2)
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
9,451 Views
Registered: ‎06-30-2010

Re: IDELAYCTRL ref clock

Correct 120 mhz is out of spec a pll or sm is required to generate the ref clk
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos