cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
10,263 Views
Registered: ‎01-19-2015

Interface with ddr3 on virtex 6 ml605

Hi, I have to implement a DDR3 SDRAM SODIMM interfaced with Virtex 6 on ML605 kit. But i'm new to this field. Pls somebody guide me which documents or tutorials i need to refer?

I have read about DDR3 RAM and tried some tests but nothing worked.

Thanks so much.

Tags (2)
0 Kudos
4 Replies
Xilinx Employee
Xilinx Employee
10,262 Views
Registered: ‎07-11-2011

Hi,

 

 

Please go through XTP047 and follow the steps

 

 

https://secure.xilinx.com/webreg/clickthrough.do?cid=183914&license=RefDesLicense&filename=ml605_MIG_pdf_xtp047_13.4_c.pdf&languageID=1

 

 

https://secure.xilinx.com/webreg/clickthrough.do?cid=181926&license=RefDesLicense&filename=ml605_MIG_rdf0011_13.4.zip&languageID=1

 

 

Also youcan refer UG406 for MIG details

 

Hope this helps

 

-Vanitha

 

 

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented
0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
10,234 Views
Registered: ‎08-02-2007

hi,

 

The newer ML605 boards were shipped with 1G RAM

 

Refer to AR http://www.xilinx.com/support/answers/44814.html

 

--hem

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Highlighted
Visitor
Visitor
10,185 Views
Registered: ‎01-19-2015

Thank you, vsrunga. It's very helpful for me.
0 Kudos
Highlighted
Newbie
Newbie
10,094 Views
Registered: ‎03-05-2015

Hello.We are also working on ddr3 and facing the same problem as you did, we have made the code but it is not working and giving the results we require. Since you have recently worked on it, could you please help us.

0 Kudos