UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer aibk01
Observer
4,659 Views
Registered: ‎05-21-2011

XC2V3000 Support

Jump to solution

I have installed both Xilinx ISE 10.1 and ISE 11.1 but i still cannot find XC2V3000 in drop down of the boards mentioned.

Which ISE package will provide me the support for this Model FPGA?

 

Plz Guide

 

Regards

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
5,886 Views
Registered: ‎08-13-2007

Re: XC2V3000 Support

Jump to solution

I'm not sure what is going on here. SP3 for 10.1 (10.1.03i) should not affect device support.

 

1) Are you sure you have Foundation?

Check Update Software Product Configuration (Start -> Programs -> Xilinx ISE Design Suite 10.1 -> ISE -> Accessories) - do you see ISE WebPACK, ISE Foundation, or ISE Foundation Simulator? [do not post your reg ID]

 

2) My 10.1.03i install shows all expected devices. See acttached.

 

 

temp.JPG
0 Kudos
4 Replies
Xilinx Employee
Xilinx Employee
4,650 Views
Registered: ‎08-13-2007

Re: XC2V3000 Support

Jump to solution

10.1.03i (10.1 with service pack 3) was the last release to support Virtex-II, so you won't find device support in 11.1 or later.

When you installed 10.1 - did you install WebPACK (free, limited device support) or Foundation ($)?

WebPACK does not support the 2V3000:

http://www.xilinx.com/ise/products/classics/parts_list.htm (ISE device support)

bt

0 Kudos
Observer aibk01
Observer
4,639 Views
Registered: ‎05-21-2011

Re: XC2V3000 Support

Jump to solution

Thank You For Your Help. I think i installed the foundation pack. But I also installed the Updates of the Software. In the Pull down menu i can see Virtex 2 but my particular device was not listed other devices of Virtex 2 family were listed.

0 Kudos
Observer aibk01
Observer
4,634 Views
Registered: ‎05-21-2011

Re: XC2V3000 Support

Jump to solution

I seem to have found the problem, although I install the foundation pack. When i upgrade it from 10.1.01 to 10.1.03. The device is no longer listed afte the update.

 

Can you please point out the reason for this.

0 Kudos
Xilinx Employee
Xilinx Employee
5,887 Views
Registered: ‎08-13-2007

Re: XC2V3000 Support

Jump to solution

I'm not sure what is going on here. SP3 for 10.1 (10.1.03i) should not affect device support.

 

1) Are you sure you have Foundation?

Check Update Software Product Configuration (Start -> Programs -> Xilinx ISE Design Suite 10.1 -> ISE -> Accessories) - do you see ISE WebPACK, ISE Foundation, or ISE Foundation Simulator? [do not post your reg ID]

 

2) My 10.1.03i install shows all expected devices. See acttached.

 

 

temp.JPG
0 Kudos