03-18-2010 12:17 PM
hello,
i have few questions about virtex-4 as following and will be thankful for any comment or answers:
your help is appreciated grealty,
amit
03-19-2010 01:47 PM
HI
will the code from the spartan 3 work in the virtex 4 with only a ucf change ? probably. If it's been coded in HDL, and no specific spartan 3 bots are used that are no tin the virtex 4.
Enough practical steps ? sorry no understand.
Virtex 4 with other hardware, yep it does that nice. HDL / EDK / C, yep all those are possible.
Suggestion, take small steps.
03-20-2010 07:00 PM
Hello Drjohnsmith,
I'm not following what you said since not sure what bots and tins means. so would you please help me with that comment?
also, from"Practical Steps" I meant if there are any documents that shows some steps that I can follow to see or get some results on Virtex-4? at least get a message on LCE or LEDs ?
You also mentioned that Virtex-4 can nicely does communication with other devices using HDL, EDI/C. Any example that I can see and learn a simple lesson?
Thanks,
amit
03-21-2010 01:57 AM
HI
yep should have done spelling check, typos are so bad.
"If it's been coded in HDL, and no specific spartan 3 bots are used that are no tin the virtex 4."
should have been
"If it's been coded in HDL, and no specific spartan 3 bits are used that are not in the virtex 4."
Apologies for that mistake.
03-23-2010 06:03 PM
Thanks for the response but to be honest still I'm not following what it means .
that is OK anyway so far nothing I found as something that I can follow up and learn V4 in practice.
It is not like Spartan 3E.