UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
1,708 Views
Registered: ‎09-29-2009

"SysAceSelfTestExample FAILED" for ML510 -- Compact Flash

UPDATE: The SysAceSelfTestExample test fails when:

 

1)  It checks to see if interrupts are disabled

2)  It checks to see if interrupts are enabled

 

-------

 

I am getting the “SysAceSelfTestExample FAILED” during the SysAce configuration peripheral test.  Not sure what is wrong so any help would be appreciated.

 

Here are the details:

 

1)  Using EDK 11.3

2)  Board: Virtex-5 ML510 FPGA (XC5VFX130T)

3)  CF card is properly formated as FAT16

4)  SysAce configuration via the provided CF card works, so the CF card is being read

 

When I build my own system using the Base System Builder, the SysAceSelfTestExample fails for the TestApp peripheral test as well.  Those details are:

 

1)  Using standalone system, with xilfatfs and write capability selected

2)  Previously used C code worked on both Virtex II and ML507 boards

3)  Tried using 10.3 SP3 and got the same error

 

Thanks

Message Edited by brennon.thomas on 01-20-2010 09:26 AM
Message Edited by brennon.thomas on 01-20-2010 09:26 AM
Message Edited by brennon.thomas on 01-20-2010 09:26 AM
Message Edited by brennon.thomas on 01-21-2010 10:40 AM
Tags (3)
0 Kudos