UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor ningfen0916
Visitor
572 Views
Registered: ‎06-08-2018

Can the v7-690t-2ffg1927 suporrt 80 GTHs?

recently I have a project,use 40 GTHs,and the 690t suporrts 80 GTHs. Below is my parameters setting.

RX:line rate 6.25G;

coding:8b/10b;

internal data with:32bits;

PLL seletion:Quad PLL;

gth count:32 gths.

 

TX:line rate 5.0G;

coding:8b/10b;

internal data with:32bits;

PLL seletion:Quad PLL;

gth count:40 gths.

But when I instanced the GTH IP core and implement the project,the bufg resource can not meet the device, and the MAP ERROR : TOO MANY COMPS OF TYPE "BUFG" TO FOUND TO FIT THIS DEVICE.

Design summary says the project uses 46 bufgs,but the device only has 32 bufgs.

And I check the gt_rxusrclk_source.v ,I found that RX IP core uses 33 bufgs and the TX IP core uses 11 bufgs.

So I have a question, 7 series family says 690T has 80 GTHs, I want to know how do I correctly use the GTH IP core and make the bufg resource meet my project ? 

I was very impatient to the way to solve this question,and it is important for me to know why .

thank you very much.

Tags (1)
0 Kudos
1 Reply
Historian
Historian
555 Views
Registered: ‎01-23-2009

Re: Can the v7-690t-2ffg1927 suporrt 80 GTHs?

Please do not post the same question to multiple boards.

 

For any other followup posts, please post them to the original thread

 

https://forums.xilinx.com/t5/Serial-Transceivers/v7-690t-2ffg1927-suporrt-80-GTHs/m-p/863720

 

Avrum

0 Kudos