cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
xil_tour
Explorer
Explorer
663 Views
Registered: ‎06-14-2018

2018.2 to 2018.2.xdf migration, xclbin not available please build

Jump to solution

Hi,

I've changed my IDE from SDx 2018.2 to 2018.2.xdf so I'm in the process of migrating my codes.

They were working, but now under XDF, I got this error in SW and HW emu:

XILINX_OPENCL="/home/me/Xilinx/SDx/2018.2.xdf/"
LD_LIBRARY_PATH="/home/me/Xilinx/SDx/2018.2.xdf/platforms/xilinx_u200_xdma_201820_1/sw/lib/x86_64:/opt/xilinx/xrt/lib/:/home/me/Xilinx/SDx/2018.2.xdf/lib/lnx64.o:/home/me/Xilinx/SDx/2018.2.xdf/lib/lnx64.o/Default:/home/me/Xilinx/SDx/2018.2.xdf/lnx64/tools/gcc/lib64"
--- 
Found Platform
Platform Name: Xilinx
XCLBIN File Name: sobel
INFO: Importing xclbin/sobel.hw_emu.xilinx_u200_xdma_201820_1.xclbin
ERROR: xclbin/sobel.hw_emu.xilinx_u200_xdma_201820_1.xclbin xclbin not available please build

Any help is welcome.

0 Kudos
1 Solution

Accepted Solutions
rsarkari
Xilinx Employee
Xilinx Employee
636 Views
Registered: ‎06-20-2018

Hi @xil_tour ,

On the left side, in the project explorer, you will have Emulation-SW tab. Under this, you will have one <some name>.xclbin file. Take this name and put it in the Run->Run Configurations->Arguments tab or tick mark the "Automatically add binary containers".

Tell me if you face any issues.

Regards,
Rajat
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if the information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

5 Replies
rsarkari
Xilinx Employee
Xilinx Employee
661 Views
Registered: ‎06-20-2018

Hi @xil_tour ,

Could you please tell me where is your xclbin located and what are the command line arguments you are giving while executing the application? 

Rajat

xil_tour
Explorer
Explorer
642 Views
Registered: ‎06-14-2018

I don't know what/where is xclbin. Where is it supposed to be ?

According a search into my filesystem, I have a few ones here and there, but not related to my new environment.

I compile through the IDE, the compilation line is quickly replaced in the console, I barely can see it, can you tell me where I can get back access to it please ?

0 Kudos
rsarkari
Xilinx Employee
Xilinx Employee
637 Views
Registered: ‎06-20-2018

Hi @xil_tour ,

On the left side, in the project explorer, you will have Emulation-SW tab. Under this, you will have one <some name>.xclbin file. Take this name and put it in the Run->Run Configurations->Arguments tab or tick mark the "Automatically add binary containers".

Tell me if you face any issues.

Regards,
Rajat
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if the information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

xil_tour
Explorer
Explorer
620 Views
Registered: ‎06-14-2018

Mmm I don't have this file, I guess the compilation went wrong.

Where can I see the build log please ?

The launch resets the console, I can't see that.

0 Kudos
xil_tour
Explorer
Explorer
607 Views
Registered: ‎06-14-2018

Oh silly me, I forgot to add the binary container in the Application Project Setting window...

Thanks for your help.

0 Kudos