cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Participant
Participant
724 Views
Registered: ‎09-30-2016

SDx 2017.4 new DEVICES

Jump to solution

Hello there,

I am trying to compile the example from github

github.com/Xilinx/SDAccel_Examples/

 

I understand that there are two DEVICES listed: 

DEVICES=xilinx:kcu1500:dynamic  or    xilinx:vcu1525:dynamic

 

However, in my case I have a adm-pcie-8k5 which comprise of KU115-2-FLVA1517E FPGA. While this FPGA is in the same family as XCKU115-2-FLVB2104e (kcu1500), they are arguably different. 

 

Hence, do I need to add a new DEVICES ?

If so, how do I do that? 

 

Thank you.  

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
748 Views
Registered: ‎11-04-2010

Hi, @jameshko ,

ADM-PCIE-8K5 platform is only supported in 2017.2. The DSA is not compatible with Sdx 2017.4 op(or newer).

So in SDx 2017.4 op(or newer) version, this platform cannot be added.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
749 Views
Registered: ‎11-04-2010

Hi, @jameshko ,

ADM-PCIE-8K5 platform is only supported in 2017.2. The DSA is not compatible with Sdx 2017.4 op(or newer).

So in SDx 2017.4 op(or newer) version, this platform cannot be added.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
Highlighted
Participant
Participant
612 Views
Registered: ‎09-30-2016
I am currently engaging AlphaData on their DSA5.0 for ADM-PCIE-8K5 . I think some level of technical collaboration from Xilinx would be appreciated. Thank you.
0 Kudos