cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
585 Views
Registered: ‎12-17-2018

There is an error running the official examples using SDAccel2018.2

Jump to solution

Hi:

We use the vcu1525  board, we have successfully installed the SDAccel 2018.2 environment, and successfully run the verification program verify.xclbin helloworld.

System version: Ubuntu16.04.5   Linux Kernel version: 4.4.0  RAM: 4g  CPU: i7-6700k license is applied for one month

Run the official example: SDAccel_Examples-2018.2 "Helloworld”, SW simulation can pass, HW always has 7 errors. Compilation can not pass

I really look forward to getting some help. Attachment is the  log file.

Thanks

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
573 Views
Registered: ‎07-16-2008

Please refer to the following similar topic and see if it helps.

https://forums.xilinx.com/t5/SDAccel/SDAccel-2018-2-fail-to-link-libdpi-so/m-p/869847

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

2 Replies
Xilinx Employee
Xilinx Employee
574 Views
Registered: ‎07-16-2008

Please refer to the following similar topic and see if it helps.

https://forums.xilinx.com/t5/SDAccel/SDAccel-2018-2-fail-to-link-libdpi-so/m-p/869847

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Highlighted
Visitor
Visitor
559 Views
Registered: ‎12-17-2018
Thanks,I will have a try!
0 Kudos