cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
hongshu
Visitor
Visitor
1,843 Views
Registered: ‎07-17-2018

Zybo not on SDSoC

Hi,

 

I have just installed SDSoC 2018.2 to use it with the Zybo board. However the Zybo does not appear on the list of available devices.

Is it possible to add the Zybo and the Pynq to SDSoC?

0 Kudos
7 Replies
khareashish_trimble
Adventurer
Adventurer
1,821 Views
Registered: ‎10-17-2017

@hongshu -  Revision platform for Zybo is available here - https://github.com/Digilent/reVISION-Zybo-Z7-20

 

Although not sure if it would work with 2018.2 as it was designed for 2017.4


hongshu
Visitor
Visitor
1,808 Views
Registered: ‎07-17-2018

Thank you for your answer @khareashish_trimble.

I'm sorry for the basic questions, as I'm new on this. But is revision platorm the same as SDSoC? I'm trying to use the Zybo and the Pynq boards in the SDx software, not on reVision Stack which I think is a different software.

0 Kudos
khareashish_trimble
Adventurer
Adventurer
1,798 Views
Registered: ‎10-17-2017

@hongshu - For using any board with SDx development environment you would need to have a platform that is designed for that particular board. You can use a revision platform or a simple platform depending on your needs. A revision platform generally has camera interfaces and other useful input outputs. The revision platform would typically also have support for xfopencv library. 

 

If you do not wish to use the revision platform, here is another SDSoC platform fir Zybo from digilent - https://github.com/Digilent/SDSoC-Zybo-Z7-20

 

If you are new to SDSoC, you can follow this tutorial to get started - https://github.com/Xilinx/SDSoC-Tutorials/tree/master/getting-started-tutorial 

 

 

khareashish_trimble
Adventurer
Adventurer
1,793 Views
Registered: ‎10-17-2017

Using a Pynq board in SDx is a bit more complicated. People have been trying to create a platform for that as well. follow this thread for more - https://forums.xilinx.com/t5/SDSoC-Environment-and-reVISION/creating-SDSoC-platform-for-Pynq-Board/td-p/854314

0 Kudos
hongshu
Visitor
Visitor
1,776 Views
Registered: ‎07-17-2018

All that is great information.

I will try to do it tomorrow @khareashish_trimble.

 

Thanks!

0 Kudos
fullbandwidth
Visitor
Visitor
1,575 Views
Registered: ‎08-22-2018

Hongshu, any luck with this? I am curious as to whether you had to return to an older version of SDx. I have been unable to get the Digilent-provided platform files for Zybo to load in 2018.2. But I may have some other configuration issues.

 

Thanks

 

0 Kudos
meet.bais
Participant
Participant
780 Views
Registered: ‎10-22-2018

I would love to know if this worked for you. Because i am also trying to use Zybo board on 2018.3 SDx version 

0 Kudos