A kernel design shows the below statistics:
convo_hw 1352580 ~ 1403196 1613604 1659114 1664220 5.378 ms 5.530 ms 5.547 ms/
HW-emulation also shows the similar value.
but running the same kernel in HW reports( vitis analyzer )
DEVICE_UTIL > 0 13.795 Device xilinx_u250_xdma_201830_2-0 was utilized for 13.795 msec./
This difference in timing is accounted to the estimated frequency or some other conditions ?
Is it possible to set frequency above 300MHZ in Alveo+vitis.