cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
1,072 Views
Registered: ‎05-23-2017

Error: Failed to create compute program from binary -44!

Jump to solution

I just installed 2017.2 on my linux system: Ubuntu 16.04.4 LTS; System Kernel :4.4.0-134-generic

And met the following error:

 

root@msl-dsma-dev56:/opt/Xilinx/xil-accel-rd-ku115/xbinst/test# ./verify.exe ./verify.xclbin 
Linux:4.4.0-134-generic:#160-Ubuntu SMP Wed Aug 15 14:58:00 UTC 2018:x86_64
--- 
XILINX_OPENCL="/opt/Xilinx/xil-accel-rd-ku115/xbinst"
LD_LIBRARY_PATH="/opt/Xilinx/xil-accel-rd-ku115/xbinst/runtime/lib/x86_64:"
--- 
CL_PLATFORM_VENDOR Xilinx
CL_PLATFORM_NAME Xilinx
loading ./verify.xclbin
ERROR: Failed to load xclbin
Error: Failed to create compute program from binary -44!
Test failed

When try to dmesg I found:

MIG Calibration failed after bitstream download /tmp/9313/0/driver/xclng/mgmt/mgmt-bit.c:816, err: -110

Any hint will be appreciated.

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,055 Views
Registered: ‎01-16-2013

Re: Error: Failed to create compute program from binary -44!

Jump to solution
Hi,

UBUNTU 16.04.4 is not supported with SDx 2017.2
Please refer supported OS https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_2/ug1238-sdx-rnil.pdf

Thanks,
Yash

P.S. UBUNTU 16.04.4 is supported with latest SDx

View solution in original post

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
1,056 Views
Registered: ‎01-16-2013

Re: Error: Failed to create compute program from binary -44!

Jump to solution
Hi,

UBUNTU 16.04.4 is not supported with SDx 2017.2
Please refer supported OS https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_2/ug1238-sdx-rnil.pdf

Thanks,
Yash

P.S. UBUNTU 16.04.4 is supported with latest SDx

View solution in original post

0 Kudos
Highlighted
Visitor
Visitor
489 Views
Registered: ‎12-11-2018

Re: Error: Failed to create compute program from binary -44!

Jump to solution

Hi,

I have the same problem with SDx 2018.2 in Ubuntu 16.04 LTS

Do you know the solution? 

varinic@varinic:/opt/dsa/xilinx_kcu1500_dynamic_5_0/xbinst/test$ ./verify.exe verify.xclbin 
CL_PLATFORM_VENDOR Xilinx
CL_PLATFORM_NAME Xilinx
Get 1 devices
Using 1th device
loading verify.xclbin

ERROR: Failed to load xclbin
Error: Failed to create compute program from binary -44!
Test failed

 

0 Kudos