UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor jhanani
Visitor
471 Views
Registered: ‎10-08-2018

Power Consumption Measurement of opencl application

Jump to solution

Hi,

I am trying to measure the power consumption of Virtex Ultrascale VUP9 through AWS cloud. 

I followed this tutorial:

https://github.com/aws/aws-fpga/blob/master/SDAccel/docs/SDAccel_Power_Analysis.md but I could not find any power report file in the mentioned folder. 

 

Thanks

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
445 Views
Registered: ‎11-04-2010

Re: Power Consumption Measurement of opencl application

Jump to solution

Hi, @jhanani ,
You can try to hook a post.tcl for Vivado route_design to report power by yourself:

--xp "vivado_prop:run.impl_1.STEPS.ROUTE_DESIGN.TCL.POST=/path/to/postopt.tcl"

 

In the postopt.tcl, add the report power command for Vivado: 
report_power -no_propagation -xpe /path/to/design1.xpe

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
1 Reply
Moderator
Moderator
446 Views
Registered: ‎11-04-2010

Re: Power Consumption Measurement of opencl application

Jump to solution

Hi, @jhanani ,
You can try to hook a post.tcl for Vivado route_design to report power by yourself:

--xp "vivado_prop:run.impl_1.STEPS.ROUTE_DESIGN.TCL.POST=/path/to/postopt.tcl"

 

In the postopt.tcl, add the report power command for Vivado: 
report_power -no_propagation -xpe /path/to/design1.xpe

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos