UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor little_tom
Visitor
524 Views
Registered: ‎12-17-2018

There is an error running the official examples using SDAccel2018.2

Jump to solution

Hi:

We use the vcu1525  board, we have successfully installed the SDAccel 2018.2 environment, and successfully run the verification program verify.xclbin helloworld.

System version: Ubuntu16.04.5   Linux Kernel version: 4.4.0  RAM: 4g  CPU: i7-6700k license is applied for one month

Run the official example: SDAccel_Examples-2018.2 "Helloworld”, SW simulation can pass, HW always has 7 errors. Compilation can not pass

I really look forward to getting some help. Attachment is the  log file.

Thanks

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
512 Views
Registered: ‎07-16-2008

回复: There is an error running the official examples using SDAccel2018.2

Jump to solution

Please refer to the following similar topic and see if it helps.

https://forums.xilinx.com/t5/SDAccel/SDAccel-2018-2-fail-to-link-libdpi-so/m-p/869847

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
513 Views
Registered: ‎07-16-2008

回复: There is an error running the official examples using SDAccel2018.2

Jump to solution

Please refer to the following similar topic and see if it helps.

https://forums.xilinx.com/t5/SDAccel/SDAccel-2018-2-fail-to-link-libdpi-so/m-p/869847

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Visitor little_tom
Visitor
498 Views
Registered: ‎12-17-2018

回复: There is an error running the official examples using SDAccel2018.2

Jump to solution
Thanks,I will have a try!
0 Kudos