UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor pulkit15158
Visitor
458 Views
Registered: ‎08-06-2018

ZC-706 Opencv Video

Jump to solution

I am trying to open a video using Videocapture function(OpenCV) but it is not able to open it. It is working fine on images but when I try to open the video using OpenCV on zc706 it fails to open it.

Is it because of codecs not available?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
395 Views
Registered: ‎09-25-2018

Re: ZC-706 Opencv Video

Jump to solution

hi @pulkit15158 ,

first of all I am not an expert, but I would suggest you to make your own petalinux based custom platform and enable opencv for video files (mp4,avi etc...)according to this post. I used this method for zedboard and ultra96 board. I did not do the third step in that post but it worked without that step.

I wish you the best.

View solution in original post

1 Reply
Highlighted
Adventurer
Adventurer
396 Views
Registered: ‎09-25-2018

Re: ZC-706 Opencv Video

Jump to solution

hi @pulkit15158 ,

first of all I am not an expert, but I would suggest you to make your own petalinux based custom platform and enable opencv for video files (mp4,avi etc...)according to this post. I used this method for zedboard and ultra96 board. I did not do the third step in that post but it worked without that step.

I wish you the best.

View solution in original post