UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
789 Views
Registered: ‎05-02-2011

dsa file open fail

Jump to solution

I find the warning information :

WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_rx/m_axis_video_aresetn_out(undef) and /v_vid_in_axi4s/aresetn(rst)
WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_tx/s_axis_video_aresetn_out(undef) and /v_axi4s_vid_out/aresetn(rst)

When I use the vivado in tcl console:

 

open_dsa zcu102_rv_ss.dsa  in revision file

in ZCU104, VCU+ZCU106, ZCU102 MPSOC get the same error

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/Docs/software-tools-system-requirements.md

 

My system: Win 10

SDx vision: Vivado 2018.2

 

 

 

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
669 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter

Yes, you can ignore the warnings.

We have tested multiple examples with this platform.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
9 Replies
Xilinx Employee
Xilinx Employee
776 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

hi @mimitter

what is the reVISION platform version?

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Contributor
Contributor
748 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

hi :

I use the SDx 2018.2, And Download the 60 days SDx license in Xilinx web.

To rebuild the Vivado Project, I find the warning information when I write open_dsa command in tcl console.

WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_rx/m_axis_video_aresetn_out(undef) and /v_vid_in_axi4s/aresetn(rst)
WARNING: [BD 41-1731] Type mismatch between connected pins: /v_hdmi_tx/s_axis_video_aresetn_out(undef) and /v_axi4s_vid_out/aresetn(rst)

 

After vivado Succesfully read DSA: zcu102_rv_ss.dsa , I find that the connectors are full connected in the Block Design

 

 

error.PNG
0 Kudos
Contributor
Contributor
743 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

this is vivado  information

0 Kudos
Xilinx Employee
Xilinx Employee
733 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter,

I assume you have downloaded the reVISION platform from here,

https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/master/Docs/software-tools-system-requirements.md

Currently the platform available at above location is 2018.3, please check which one you have.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Contributor
Contributor
719 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

@nutang

thank your reply

I download the revision 2018.3 , and run this dsa in SDx 2018.3 in Unbuntu OS, see the same warning information.

And more warning information after key-in the Validate Design . 

Could you rebuild the revision example in your environment. 

I will re-try  in other PC environment. 

Thank you 

 

error1.PNG
error2.PNG
error3.PNG
error4.PNG
0 Kudos
Xilinx Employee
Xilinx Employee
708 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

hi @mimitter

Thank you very much for detailed information.

I will check this and update you.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Xilinx Employee
Xilinx Employee
679 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter

I observed the warning in my machine too.

 

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Contributor
Contributor
671 Views
Registered: ‎05-02-2011

Re: dsa file open fail

Jump to solution

hi @nutang:

 

Thank you, your help!! 

So warnings are correct in revision project,influencing  the project implement ??

 

And I find that interrupts are not full connected in project.

Could  I ignore these warnings ??

 

 

interrupt.PNG
0 Kudos
Xilinx Employee
Xilinx Employee
670 Views
Registered: ‎08-20-2018

Re: dsa file open fail

Jump to solution

Hi @mimitter

Yes, you can ignore the warnings.

We have tested multiple examples with this platform.

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos