UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
6,567 Views
Registered: ‎10-20-2014

Control with impact the "USB-100 Portable Boundary Scan Controller" from Asset

Hi guys,

 

is it possible to control with the Xilinx impact tool the "USB-100 Portable Boundary Scan Controller" from asset.

 

Actually we use three DLC10 Platform cable USB II in our testadapter to programm three FPGAs, but because we need the possibility to do some boundary scan tests (testing AC-coupled differential nets), we want to replace this cables with the "USB-100 Portable Boundary Scan Controller".

 

The programming environment (developt in labview which analyse the impact logfile) we want to keep. Therefore it would be fine if we can use the Xilinx impact tool together with the "USB-100 Portable Boundary Scan Controller".

 

Would be fine if someone could help me

 

BR

0 Kudos
1 Reply
6,549 Views
Registered: ‎10-20-2014

Re: Control with impact the "USB-100 Portable Boundary Scan Controller" from Asset

Hi guys,

 

...

it looks like, that nobody has experience with such combinations.

 

Has anybody experience with iMPACT, controlling other download calbes then download cables from the Xilinx company. In special download cables with JTAG functionality.

 

For example such 3rd Party Jtag Tools:

http://www.xilinx.com/products/design_resources/config_sol/resource/isp_ate.htm

 

Best regards

0 Kudos