We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Showing results for 
Search instead for 
Did you mean: 
Observer asangare
Registered: ‎12-08-2009

DEV:0 MyDevice0 (XC6SLX150) is not configured

I  am having the problem below:


COMMAND: open_cable
INFO: Started ChipScope host (localhost:50001)
INFO: Opened socket connection: localhost 50001 localhost/
INFO: Trying to open Xilinx Platform USB Cable on port USB2
INFO: Successfully opened Xilinx Platform USB Cable
INFO: Cable: Platform Cable USB II, Port: NULL, Speed: 3 MHz
INFO: DEV:0 MyDevice0 (XC6SLX150) is not configured


Chipscope Pro Analyzer does not let me do anything with the chipscope core that I had inserted. I can't view the signals or do anything else.

Any ideas on what is the problem. My design consists a microblaze + custom logic.




0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
Registered: ‎01-03-2008

Re: DEV:0 MyDevice0 (XC6SLX150) is not configured

ChipScope isn't the problem.  The problem is that you haven't configured the device yet with your bitstream.

------Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com
0 Kudos
Registered: ‎11-11-2014

Re: DEV:0 MyDevice0 (XC6SLX150) is not configured

I am having a similar problem but with a different device.

INFO: DEV:0 MyDevice0 (XC3S250E) is not configured


I know that it's not configured but I don't know where to start in order to solve this problem. I'm using Basys2 from Digilent and as you've guessed it a Xilinx XC3S250E. I have some old piece of code for the XC3S100 (when I try to configure my device with this code I get:

ERROR: Wrong configuration stream for device
ERROR: Configuration failed.

I assume that I get this error because I'm using a different chip) but I don't know what to change and where. I have the project that generates the binaries code for XC3S100 and I changed the project chip to 250 but now I get an error when I try to generate the bitstream for my configure settings.

I'm a begginner trying to understand everything as fast as possible in order to complete my degree project.

Any tips/tricks/books/ knowledge are welcomed.


Thank you!

0 Kudos