UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
606 Views
Registered: ‎08-04-2018

ILA window not opening after I program the device

Hi, I set up the ILA debug  after synthesis (using vivado 2016.1). I get no errors I generate bitstreams, I program the device, and refresh again. Why don't I see the debugger window or the trigger window? 

 

 

 

log copy is below

 

 

 

Finished Writing Synthesis Report : Time (s): cpu = 00:00:34 ; elapsed = 00:00:45 . Memory (MB): peak = 610.809 ; gain = 400.539
---------------------------------------------------------------------------------
Synthesis finished with 0 errors, 0 critical warnings and 2 warnings.
Synthesis Optimization Runtime : Time (s): cpu = 00:00:18 ; elapsed = 00:00:24 . Memory (MB): peak = 610.809 ; gain = 139.746
Synthesis Optimization Complete : Time (s): cpu = 00:00:34 ; elapsed = 00:00:45 . Memory (MB): peak = 610.809 ; gain = 400.539
INFO: [Project 1-571] Translating synthesized netlist
INFO: [Project 1-570] Preparing netlist for logic optimization
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
INFO: [Project 1-111] Unisim Transformation Summary:
No Unisim elements were transformed.

INFO: [Common 17-83] Releasing license: Synthesis
30 Infos, 9 Warnings, 0 Critical Warnings and 0 Errors encountered.
synth_design completed successfully
synth_design: Time (s): cpu = 00:00:31 ; elapsed = 00:00:34 . Memory (MB): peak = 634.977 ; gain = 404.422
INFO: [Common 17-1381] The checkpoint 'E:/ the_mission/level_2/V2/V2.runs/synth_1/Top_design_wrapper.dcp' has been generated.
report_utilization: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.016 . Memory (MB): peak = 634.977 ; gain = 0.000
INFO: [Common 17-206] Exiting Vivado at Thu Aug 09 16:14:52 2018...

0 Kudos
3 Replies
Moderator
Moderator
585 Views
Registered: ‎02-09-2017

Re: ILA window not opening after I program the device

Hi @benaka,

 

That is a log just for the synthesis. 

After you open HW Manager and program the board, could you verify if any message/warning is shown in the console?

 

Is suspect the ILA (or its clock) is not being found, so the visualization is not initialized.

 

In addition, what is the device that you are using?

 

Thanks,

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Moderator
Moderator
518 Views
Registered: ‎02-09-2017

Re: ILA window not opening after I program the device

Hi @benaka,

 

Any updates on this case? Please let us know if you were able to fix it or if you still need help.

 

Thanks!

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Adventurer
Adventurer
509 Views
Registered: ‎08-04-2018

Re: ILA window not opening after I program the device

Hi, 

I was able to get it working. 

 

Thank you for the support.

 

 

 

0 Kudos