UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor al.ex.us
Visitor
8,055 Views
Registered: ‎04-28-2013

IMPACT with Digilent HS2 does not see non-Xilinx ICs in the chain

Particularly, I have 3 Blackfins and 1 CoolRrunner in the chain.

Be sure I have proper BSDLs for the Blackfins, but I still cannot do anything with CollRunner.

Whereas VisualDSP by Analog Devices works good via JTAG with Blackfins in this chain.

 

When using Parallel cable, the chain is OK.

(My collegues, though, do have troubles even with Parallel cable in case of such non-uniform chains, but this is another question).

 

Any ideas?

 

IF ANYBODY HAS ANY EXPERIENCE (positive or negative)

WITH SUCH MIXED CHAINS, PLEASE REPORT!!!

0 Kudos