07-24-2014 12:58 AM
Dear All,
I have an old design (1998) based on a few XC3030 that I wish to update to modern and available FPGAs.
The original design was based on Orcad (don't remember which version) and the ISE Foundation 2.1.
I still have my design files, and I can open them with an old version of Orcad, but unfortunately I lost my original ISE 2.1 installation CDs, and so I miss the original component libraries.
This result in seeing only the wires in my design files, making somewhat difficult to guess what was in.
Is it possible to downlod somewhere the original ISE 2.1 Orcad libraries, so I can open and print my files?
I really don't need the whole software, nor I need to edit those files.
The new design will be HDL based and with some latest WebPack , so I need only to see and possibly print once what was in to start my new design.
Regards.
Thanks.
Mau.
07-28-2014 03:37 AM
Hi,
You can find the libraries at http://www.xilinx.com/txpatches/pub/swhelp/orcad/or4sdt3.zip
Thanks,
Vinay