UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor bmeyer
Visitor
7,900 Views
Registered: ‎09-17-2008

SAIF net names not matching for XPA

I'm using XPA version 12.4, and when I load my SAIF file generated from ISIM, I'm only seeing a 2 or 3% net name match rate.  Not very useful.  I assume I have something set wrong in my tools, but the tool gives no feedback as to what it is unhappy about.  I see that in Version13.3, a -strip path option was added to strip off the top level names to improve matching.  I'm not in a good postition to move to 13.3 right now... is there something I can do in the tool or manually in the saif file to get the net names to match?

In ISIM, I run:
  saif open -file topfile.saif
  run 10us
  saif close


I get:

(SAIFILE
   (SAIFVERSION "2.0")
   (DIRECTION "backward")
   (DESIGN )
   (DATE "Thu Aug 07 09:35:48 2014")
   (VENDOR "Xilinx, Inc")
   (PROGRAM_NAME "ISim")
   (VERSION "M.81d")
   (DIVIDER /)
   (TIMESCALE  1 ps)
   (DURATION 1000000)
   (INSTANCE tb_top1
       (INSTANCE uut
               (NET

           ...... etc.



I tried  saif open -scope uut , and that doesn't help.

0 Kudos